Hot Metal Detector System
HOT METAL DETECTOR are specially designed to give long and failure free operation in harsh industrial environment and are absolutely maintenance free. It contains no moving parts and is made of quality and tested electronic components totally sealed to the protection class of IP – 65.
Operating Principle
The infrared radiation, received through the lens system, is transmitted to an IR detector. When the radiation exceeds trigger point, the electrical switching output is activated. The Hot Metal Detector electronic circuitry compensates for ambient temperature changes and component aging. Adjustment is therefore not necessary, thus providing higher operational safety and reliability.
Design Features
Hot Metal Detector are rugged infrared switches completely epoxy resin encapsulated in stainless steel housings.
Hot Metal Detector designed to be impervious to the effects of steam, water, dust, shock, vibration and oily conditions
associated with heavy industrial environments. They are temperature compensated for extreme ambient temperature conditions. The hot metal detector are designed to serve and operate anything from 300°c to 1200°c, however distance adjustments is required for each case so as to obtain proper IR radiations.
The sketch above indicates a typical application in a slab mill. The viewing angle determines the
scanned area.
Application
The hot metal detector is an infrared switch especially designed for fault-free operation in the harsh environments of heavy industry. For more than 15 years HMD have been successfully installed to monitor hot products in:
ROLLING MILLS
To control cut to length shearing, monitor hot rods, controlling roller tables, coil regulating, switching in crosscut hauler, monitor de-sealer, cooling beds, winder control, monitor edge washing, continuous Casting or tracking of high speed wire.
Blast Furnaces General Industry
To monitor waste wherever infrared radiation requires a reliable signal.
EMAIL: info@chandansensor.co.in
Website : www.chandansensor.co.in
Website : www.chandansensor.com
5 comments
Comments feed for this article
February 25, 2008 at 5:49 pm
Alberto Pavetti
Hi, I need contact with your reprentative in Argentina.
Thanks.
March 6, 2008 at 2:29 pm
BUNTY
Dear Sir,
Thanks,for your interest in our Product.we are sorry to say that we don’t have a representative at Argentina as of now.We Shall look forward in near future.
Please Visit our Blog http://www.chandansensor.com/
Thanks
Bunty Adhikari
February 2, 2009 at 1:43 pm
MARTHIE
WE NEED PRICES AND AVAILABILITY ON YOUR HMD. DO YOU HAVE AGENTS IN SOUTH AFRICA
February 2, 2009 at 1:44 pm
MARTHIE
QUOTE VIA MAIL PLEASE
February 5, 2009 at 4:34 pm
BUNTY
Dear Sir,
Thanks for the query on our product, but we are sorry to know that we dont have an representative in Africa.Thou we have supplied recently to
M/s.Steel Rolling Mills Ltd.
Kampala (UGANDA)
If you are interested please send your official query to Info@chandansensor.co.in
Regards
Bunty Adhikari
+91-9845520781
+91-9880045892